Pasteur Pipet Adapters
Plastic adapters that hold disposable 5 3/4 inch long glass pipets and attach to luer fittings. Internal flow control orifice insures even gas flow. They are available by the dozen or in sets of 50 or 100.
| Adapters |
1 dozen |
Catalog No. NA0636 |
| Adapters |
50 each |
Catalog No. NA1325 |
| Adapters |
100 each |
Catalog No. NA1425 |
Test Tube Racks
Stainless steel racks will accept one size lest tube in the range 10mm to 30mm. When ordering, specify the test tube diameter and length in millimeters, the shape of the tube end (round, conical, flat) and the material (glass or plastic). This information will determine the correct rack size.
| For MULTIVAP 113 ( 49 samples) |
Catalog No. NA1310 |
| For MULTIVAP 114 (100 samples) |
Catalog No. NA1410 | |
Manifold and Rack 16 Positions
Used when solutions in 150ml beakers, 75 ml Erlenmeyer flasks or 125 flat bottom flasks need to be concentrated. They install on the standard MULTIVAP 113 stand and bath.
| Manifold 16 position MULTIVAP 113 |
Catalog No. NA0117 |
| Rack 16 position MULTIVAP 113 |
Catalog No. NA1311 | |
Cover Plate for MULTIVAP Bath
Stainless steel cover slides under stand frame and rests on bath rim. Allows bath to be remain on in stand by mode when no sample rack is installed. Maintains bath temperature and prevents bath going to dryness.
| Bath cover plate MULTIVAP 113 |
Catalog No. NA1326 |
| Bath cover plate MULTIVAP 114 |
Catalog No. NA1426 | | |
Gas Flow Meter
Current MULTIVAPs are equipped standard with these. devices. They can be added to older units and include a bracket for mounting on the side of the bath. The meter with valve serves as the main gas control for the instrument. The scale is in liters per minute.
| Meter 0 to 20 Ipm for N-EVAP 113 |
Catalog No. NA1521 |
| Meter 0 to 30 Ipm for N-EVAP 114 |
Catalog No. NA1421 | | |
Needles
Standard needles for N-EVAPand MULTIVAP are 4 inches long 19-gauge stainless steel. They are available by the dozen or in sets of 50 or 100.
| 4 inch 19ga |
1 dozen |
Catalog No. NA0603 |
| 4 inch 19ga |
50 each |
Catalog No. NA1303 |
| 4 inch 19ga |
100 each |
Catalog No. NA1403 |
Longer 6 inch 19 gauge needles. Used with deep test tubes.
| 6 inch 19ga |
1 dozen |
Catalog No. NA0605 |
| 6 inch 19ga |
50 each |
Catalog No. NA1305 |
| 6 inch 19ga |
100 each |
Catalog No. NA1405 |
Larger diameter needles. Used for greater Nitrogen flow and faster evaporation.
| 4 inch 16ga |
1 dozen |
Catalog No. NA1105-16 |
| 4 inch 14ga |
1 dozen |
Catalog No. NA1105-14 |
| 6 inch 16ga |
1 dozen |
Catalog No. NA1106-16 |
| 6 inch 14ga |
1 dozen |
Catalog No. NA1106-14 |
All sizes can be Teflon coated for acid resistance and easier cleaning.
Add a -T to the catalog numbers above.
Rota-Tables
Circular epoxy coated aluminum platform rotates on a bearing. Installs under N-EVAP or MULTIVAP baths for rotating entire unit. Also useful for general laboratory applications where equipment must be rotated for easier access to all sides. Three sizes available. Will support up to 100 pounds
| Rota-Table 8.5 inch diameter |
Catalog No. NA1115 |
| Rota-Table 12 inch diameter |
Catalog No. NA1215 |
| Rota0Table 18 inch diameter |
Catalog No. NA1515 | | |
Top of Page |
