MULTIVAP Nitrogen Evaporators


Nitrogen Evaporators Menu: Introduction to Nitrogen Evaporators N-EVAP / Instrument & Bath Specifications and to Order Online / N-EVAP Accessories MULTIVAP / Instrument & Bath Specifications and to Order Online / MULTIVAP Accessories Return to Home Page

MULTIVAP Nitrogen Evaporators for Sample Concentration

MULTIVAP Model No. 11350-Z	MULTIVAP Model No. 11450-RT
Click here for: Instrument & Bath Specifications and to Order Online

The instrument consists of a rectangular gas distribution system mounted on a frame and stand assembly. Test tubes are loaded in batches of 49 or 100 in a square stainless steel rack. Each row and column is numbered. The gas at 10 to 15 psig passes through an adjustable flow meter to the distribution manifold. Each row of 7 or 10 is controlled by a valve. Needles or glass pipets blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents. Acid resistant models are. available for corrosive solutions.

The rectangular stainless steel water bath is thermostatically controlled and will accurately maintain water temperature from 30° to 70° C. It is equipped with a water-level device and a high-temperature limit switch. Also optional are an electrical GFCI plug and an intrinsically-safe purged case. The bath is UL/CUL approved for laboratory use.

MULTIVAP Features:

	Five models available in 30, 48, 64, 96 or 100 positions.
	Compact size lakes minimal hood space.
	Uses Nitrogen or air as the evaporative agent.
	Water bath provides gentle heat.
	Removable racks make handling large batches of samples easy.
	Band spring hoist assembly for effortless raising or lowering of the manifold.

	Accommodates samples in test tubes 10 to 30 mm diameter. Volumes from 1 ml to 50 ml.
	A gas flow meter with valve controls and indicates gas consumption.
	A needle valve adjusts gas flow at each row of 7 or 10.
	Stainless steel 4-inch x 19-gauge needles standard.
	All metal parts are made of stainless steel, chromed brass or anodized aluminum.

Top of Page

Site Navigation Menu:

Nitrogen Evaporators: Introduction / N-EVAP / MULTIVAP Solvent Evaporators: Introduction / S-EVAP-RB / S-EVAP-KD
Solvent Extractors: ROT-X-TRACT-S / ROT-X-TRACT-L / ROT-X-TRACT-LC for Corning Accelerated One-Step® Glassware
Organomation Scientific Glassware / Organomation Heating Devices / Organomation Instrument Warranty and Service Information

Return to Home Page

For further information, contact us at:

266 River Road West, Berlin, MA 01503-1699 USA
Phone: (888) 838-7300 Fax: (978) 838-2786
Email: organomation@worldnet.att.net