Low Cost Solvent Evaporator for Kuderna-Danish Flasks
DESCRIPTION
The mechanical thermostat 5 position S-EVAP-KD (Cat# 12037) can evaporate up to 5 samples at once with a capacity of up to 500 ml at each sample position. Glassware sets can be purchased for individual solvent collection (Cat# GS2153), or central solvent collection (Cat#GS2153-C with Cat# GS2156-C5).
Smaller glassware accommodating up to 250 ml can be purchased for individual solvent collection (Cat# GS2152), or central solvent collection (Cat# GS2152-C with Cat# GS2156-C5). Smaller glassware is accommodated with the use adapter rings (Cat# XA2284).
STANDARD FEATURES
-
Condenser holder assembly for solvent recovery condensers
-
Flow meter and rigid supply tube for condenser water supply
-
Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation
-
Parallel water supply/drain manifolds with quick disconnect tube fittings
-
Bath temperature range 30°C - 100°C
-
Evaporate solvents with boiling points up to 65°C
-
Mechanical thermostat temperature control +/- 2°C
OPTIONS
-
Positive pressure type Z purged bath (Option Code -Z)
-
240V wiring and plug (Option Code -2)
-
Reduced height system, 32 inches tall for KD flasks/deep bath
-
Digital electronic temperature control +/- .5°C (Option Code -CB)
SPECS
| Instrumental Name | S-EVAP |
| Application | Kuderna-Danish Flasks / Deep Bath |
| Instrumental Catalog Number | 11220-A |
| Number of Sample Positions | 5 |
| Individual Solvent Collection | |
| Overall Dimension (w x d x h) | 24 x 22 x 40 in 61 x 56 x 102 cm |
| Required Glassware | GS2152 or GS2153 |
| Sample Flask Type | Kuderna-Danish, 250 or 500 mL |
| Concentrator Tube | Insulated tip, 10 mL |
| Snyder Column | 3-ball design, 253 mm |
| Condenser Type | Inverted Hopkins with 24/40 side arm |
| Collection Flask | Round with flat bottom, 500 mL |
| Central Solvent Collection | |
| Overall Dimension (w x d x h) | 18 x 16 x 40 in 46 x 41 x 102 cm |
| Required Glassware | GS2152-C or GS2153-C GS2156-C5 |
| Sample Flask Type | Kuderna-Danish, 250 or 500 mL |
| Concentrator Tube | Insulated tip, 10 mL |
| Snyder Column | 3-ball design, 253 mm |
| Condenser Type | Inverted Hopkins with 1/4 in tube fitting |
| Collection Flask | Central with 5 ports, 2.5 L |
| Heating Device Specs | |
| Bath Model Number |
10129 |
| Heating Medium | Water |
| Inside Dimensions (Diameter x Depth) | 12.0 x 8.5 in 30.5 x 21.6 cm |
| Outside Dimensions (w x d x h) | 18 x 16 x 11 in 46 x 41 x 28 cm |
| Total Wattage | 1100 W |
| Bath Temperature Range | 30-100 °C |
| Temperature Controller Type |
Mechanical Thermostat |
| Controller Accuracy | +/- 2 °C |
RESOURCES
ACCESSORIES
-
500 ml individual collection glassware set Cat# GS2153
-
500 ml central collection glassware set Cat# GS2153-C with Cat# GS2156-C5
-
250 ml individual collection glassware set Cat# GS2152
-
250 ml central collection glassware set Cat# GS2152-C with Cat# GS2156-C5
-
KD rack for 250/500 ml flasks, 8 pos Cat#XA2290
-
Adapter rings for 3.875 in hole Cat# XA2284
-
Cover for 3.875 in disk holes Cat# XA2283
-
Cover for 3.0 in disk holes Cat# XA2282
-
Chiller
REPLACEMENT PARTS
-
Buna O-ring set Cat# P1332
-
White silicone tubing, 10 ft Cat# P2616
-
Thermometer 100°C Cat# NA1110
For information on parts and accessories not listed, please contact a sales technician.
