• There are no suggestions because the search field is empty.


Claind Laboratory Generators


AirGen GC
Zero Air Generator


The AirGen GC is capable of distributing 3000 mL/min of zero air. It comes with a PSA dryer and Pt/Pd catalytic reactor. It also features Claind's Platinum Palladium HC system to completely remove hydrocarbons with a HCT less than 0.1ppm. The AirGen is excellent for NPD and FID and provides a stable and noise-free base line. It can be adapted to support up to 8 FID, and is ready to be connected to the dedicated AirComp compressor. Parallel connection allows for a configuration of up to four stackable towers. It features a CPU with touch screen display, which can be linked to a generator using CAN-BUS. This enables monitoring of the operating status and provides access to the maintenance menu, alarm reports, and functional parameters.

Touch Screen Display

CPU with touch screen display connectable with CAN-BUS

Plug and Play

Comes ready to be connected to a dedicated AirComp compressor.

Parallel Connection

Connect up to four stacked generators in a tower configuration. 

UHP PSA Technology

Ensures 100% removal of hydrocarbons with HCT at <0.1ppm for applications with high sensitivity detectors.


  • Modular configuration

  • Claind's PSA Technology

  • Easy, "plug and play" integration with the dedicated Brezza series air compressor AirComp

  • Able to feed up to 8 FIDs

  • Platinum Palladium HC system for HCT integral removal to less than .1 ppm for a stable and interference free baseline

  • CPU with Touch Screen Display (connectable with CAN BUS) allows you to monitor the operational status 

  • CPU also has an Ethernet output for PC connection 



Instrument Name AirGen GC
Flow Rate 3000 mL/min +/- 10% at 2000 meters above sea level
Technology Employed Pressure Swing Adsorption (PSA); Catalytic Reactor Pl/Pd
Output Pressure

0 - 87 PSI

0 - 6 bar

Purity HCT < 0.1 ppm
Moisture < -50 °C dew point ATP +/- 2 °C ATP
Air Input Characteristics

Particulate ≤ 0.01 mm
Oil vapors ≤ 0.01 mg/m^3 
Moisture ≤ 3°C dew point ATP
Min pressure : 8 bar/115 psi

Air flow rate: 8 L/min

Electrical Supply  115 V +/- 10% 60 Hz 250 W
230 V +/- 10% 50 Hz 250 w
Protection Index  IP20
Noise < 50 dBA for 98% of operation time
< 60 dBA for 2 sec. each cycle
Operating Temperature  41 °F - 95 °F (5°C - 35°C)
Environmental Humidity 

maximum of 90% without condensation

Maximum Altitude 

2000 meters above sea level

6561.68 feet above sea level


Height: 18.6" (47cm)

Width: 14.9" (38cm)

Depth: 20.8" (53cm)


62lbs (28kg)

Pneumatic Connections

Compressed air inlet: G 1/8" female

Purified air output: G 1/8" female

Warranty  2 years


Amy & David CTA



  • AirComp oil free compressor

  • CPU: User interface with touch screen display Brezza version

  • Installation kit

  • Maintenance kit for 8,000 or 16,000 running hours




Sorry, no one found for that Search. Try changing your filter and search again.

Stay up-to-date with
the latest news &