AirGen TOC
Zero Air Generator
DESCRIPTION
The AirGen TOC is capable of providing 1500 mL/min with hydrocarbon removal at less than .1ppm and carbon dioxide at less than 1ppm. Features a high efficiency end filter to remove residual CO2. Platinum Palladium HC system completely removes HCT for an absolutely stable, noise-free baseline. It is ready to be connected to a dedicated AirComp compressor, and parallel connection allows for up to 4 stackable generators in a tower configuration. It features a CPU with touch screen display, which can be linked to a generator using CAN-BUS. This enables monitoring of the operating status and provides access to the maintenance menu, alarm reports, and functional parameters.
Touch Screen Display
CPU with touch screen display connectable with CAN-BUS
Plug and Play
Comes ready to be connected to a dedicated AirComp compressor.
Parallel Connection
Connect up to four stacked generators in a tower configuration.
UHP PSA Technology
Ensures 100% removal of hydrocarbons with HCT at <0.1ppm for applications with high sensitivity detectors.
STANDARD FEATURES
-
Modular configuration
-
Claind's PSA Technology
-
Easy, "plug and play" integration with the dedicated Brezza series air compressor AirComp
-
UHP Zero Air with CO2 at < 1 ppm and HCT at < 0.1 ppm. The optimal solution for TOC Analyzers!
-
Platinum Palladium HC system for HCT integral removal to less than 0.1 ppm for a stable and interference free baseline
- CPU with Touch Screen Display (connectable with CAN BUS) allows you to monitor the operational status
- CPU also has an Ethernet output for PC connection
SPECS
| Instrument Name | AirGen TOC | |
| Flow Rate | 1500 mL/min +/- 10% at 2000 meters above sea level | |
| Technology Employed | Pressure Swing Adsorption (PSA); Catalytic Reactor Pl/Pd | |
| Output Pressure |
0 - 72 PSI 0 - 5 bar |
|
| Purity |
HCT < 0.1 ppm Residual CO2 < 1 ppm |
|
| Moisture |
< -70 °C dew point ATP +/- 2 °C ATP |
|
| Air Input Characteristics |
Particulate ≤ 0.01 mm Air flow rate: 8 L/min |
|
| Electrical Supply |
115 Vac ±10% 60 Hz 250W |
|
| Protection Index | IP20 | |
| Noise | < 50 dBA for 98% of operation time < 60 dBA for 2 sec. each cycle |
|
| Operating Temperature | 41 °F - 95 °F (5°C - 35°C) | |
| Environmental Humidity |
maximum of 90% without condensation |
|
| Maximum Altitude |
2000 meters above sea level 6561.68 feet above sea level |
|
| Dimensions |
Height: 18.6" (47cm) Width: 14.9" (38cm) Depth: 20.8" (53cm) |
|
| Weight |
62lbs (28kg) |
|
| Pneumatic Connections |
Compressed air inlet:G 1/8" female Purified air output: G 1/8' female |
|
| Warranty | 2 years | |
ACCESSORIES
-
AirComp oil free compressor
- CPU: User interface with touch screen display Brezza version
- Installation kit
- Maintenance kit for 8,000 or 16,000 running hours
GET A QUOTE