• There are no suggestions because the search field is empty.


Claind Laboratory Generators


Nitrogen Generator


The NiGen GC/HC is available in both a basic and HC version which completely removes hydrocarbons using a Pt/Pd catalyzer. It is capable of distributing 500 L/min with greater than 99.9995% purity. It's designed to be connected to a dedicated AirComp compressor (can be purchased separately). Parallel connection allows for up to 4 generators to be stacked in a tower configuration. It features a CPU with touch screen display, which can be linked to a generator using CAN-BUS. This enables monitoring of the operating status and provides access to the maintenance menu, alarm reports, and functional parameters. It is capable of supporting up to 12 FIDs or NPDs with makeup gas or up to 7 ECDs.


PSA Technology 

High purity nitrogen guaranteed by Pressure Swing Adsorption  

"Fast Purity" Technology

Claind's "Fast Purity" technology allows high purity nitrogen to be delivered quickly.

Parallel Connection

Connect up to four stacked generators in a tower configuration. 

UHP PSA Technology

Ensures 100% removal of hydrocarbons with HCT at <0.1ppm for applications with high sensitivity detectors.


  • Modular configuration

  • Capacity to supply up to 12 FIDs/NPDs with makeup gas, or up to 7 ECDs or 5 S/S

  • Easy, "plug and play" integration with the dedicated Brezza series air compressor AirComp 

  • Included Fast Start technology guarantees UHP after only 30 minutes 

  • HC model includes Pt/Pd to remove up to .1ppm of THC

  • CPU with Touch Screen Display (connectable with CAN BUS) allows you to monitor the operational status 

  • CPU also has an Ethernet output for PC connection 



Instrument Name NiGen GC/HC
Flow Rate 500 L/min 
Technology Employed Claind's Pressure Swing Adsorption (PSA) Fast Purity Process
Output Pressure

0 - 87 PSI

0 - 6 bar

Purity > 99.9995%
Total Hydrocarbons < 0.1 ppm (for HC model only)
Air Input Characteristics

Particulate ≤ 0.01 mm
Oil vapors ≤ 0.01 mg/m^3
Moisture ≤ 3 °C dew point ATP
Min pressure : 8 bar
Air flow rate: 6 L/min

Electrical Supply for NiGen GC 115/230 V
+/- 10% 60-50 Hz 50 w
Electrical Supply for NiGen GC HC 115 V +/- 10% 60 Hz 200 W
230 V +/- 10% 50 Hz 200 W
Protection Index  IP20
Noise < 50 dBA for 98% of operation time
< 60 dBA for 2 sec. each cycle
Operating Temperature 

40 °F - 100 °F (5 °C - 40 °C)

Environmental Humidity  maximum of 90% without condensation
Maximum Altitude 

2000 meters above sea level

6561.68 feet above sea level


GC Height: 15.8" (40cm) 

GC HC Height: 18.6" (47cm)

Width: 14.9" (38cm)

Depth: 20.8" (53cm)


GC: 63lbs (28kg)

GC HC: 70.5lbs (32kg)

Pneumatic Connections Compressed air inlet : G 1/8” female
Nitrogen outlet: G 1/8” female
Warranty 2 years


Amy & David CTA



  • AirComp oil free compressor

  • CPU: User interface with touch screen display Brezza version

  • Installation kit

  • Maintenance kit for 8,000 or 16,000 running hours




Sorry, no one found for that Search. Try changing your filter and search again.

Stay up-to-date with
the latest news &