S-EVAP-KD

Solvent Evaporators for Kuderna Danish (KD) Flasks

The S-EVAP-KD instruments are available in two temperature control options: digital control or mechanical thermostat.  There are also several different models to accommodate various flask sizes (250 ml, 500 ml, and 1000 ml).  

 

 Digital Temperature Control:

 S-EVAP-KD 10 position, 250 ml, Central Collection S-EVAP-KD, 8 position, 500 ml, Individual Collect 
12010 12018
Samples up to 250 ml, 10 positions Samples up to 500 ml, 8 positions

 

Mechanical Thermostat:

 S-EVAP-KD 8 position, 250ml individual collect
12027 12037
Samples up to 250 ml, 8 positions Samples up to 500 ml, 5 positions

 

The S-EVAP KD combines standard KD evaporation procedures with our unique rotary water bath and manifold, increasing sample through put and bench space. The S-EVAP-KD comes in 5, 8, and 10 position models. Organomation’s S-EVAP solvent evaporators have a broad range of applications including oil and grease analysis using Freon and other approved solvents, concentrating extracted materials from Soxhlet operations, and other KD evaporation methods.

At each sample position the KD flask rests on the bath cover disk and the concentrator tube sits partially submerged in the deep water bath below the cover disk.  The solvent boils from the flask and through the Snyder column.  The solvent vapor then cools in the condenser which is attached to a centrally located water manifold.  The glassware is held in place with quick disconnect fittings which allow for easy retrieval of samples. The solvent leaves the condenser through a specially designed side arm into either an individual collection flask or a centrally located solvent collection vessel.  Solvent recovery through individual or central collection options reduces laboratory emissions and increases laboratory and environmental safety.  The S-EVAP-KD comes standard with Organomation’s reduced height glassware so that the instrument can fit into a standard fume hood.