• There are no suggestions because the search field is empty.

PRODUCTS

High-Quality, American-Made Lab Equipment

#NA1990

NI-GEN LCMS 40-1
Nitrogen Generator

DESCRIPTION

The NiGen LCMS 40-1 from Italian gas generator manufacturer Claind is designed to satisfy the needs of the LC-MS and sample preparation fields. The NiGen 40-1 is compatible with all Organomation nitrogen evaporators up to 100 sample positions, along with all LC-MS analyzers on the market. It is equipped with a fully integrated oil-free compressor, eliminating the need for a separate source of compressed air. Special soundproof casing keeps the noise to a minimum while the compressor is running.

The NiGen 40-1 relies on Pressure Swing Adsorption (PSA) technology to separate nitrogen from the air. The unit uses molecular sieves to remove oxygen, water, and trace hydrocarbons, leaving a stream of high purity nitrogen gas. Compressed air and generated nitrogen are stored in tanks of up to 50 liters each, allowing for less frequent cycles of the internal air compressor.

Convenient

Integrated air compressor eliminates the stress of sourcing an appropriate compressor to run your generator

Low Maintenance

Compressor maintenance required only after 16,000 working hours

Quiet

Less than 50 decibels in standby mode

Reliable

High-capacity gas storage tanks reduce the frequency of compressor cycles, reducing noise levels and wear on the motor

STANDARD FEATURES

  • Built-in oil free air compressor

  • Full turn wheels

  • Touch screen interface

  • Condensation drain line

  • Two-year warranty

 

COMPATIBLE FEATURES

  • All Organomation evaporators up to 100 sample positions

  • All LC-MS analyzers on the market

About Claind:

Founded in 1979, Claind is an Italian manufacturer of hydrogen, nitrogen, and zero air generators for the analytical laboratory, food and beverage, and laser cutting industries.

 

 

Amy & David CTA

SPECS

Instrumental Name NiGen LCMS 40-1
Instrument Catalog Number NA1990
Flow Rate Up to 38 NL/min
Technology PSA
Output pressure 0 - 100 psi
0 - 7 bar
Electrical Requirements 125 V / 25 Amp / 60 Hz
Total Wattage 1600 W
Index of Protection IP20
Noise Level < 50 dBA during standby
< 65 dBA with compressor running
Overall Dimensions (w x d x h) 17.3 x 43.3 x 52 in
44 x 110 x 132 cm
Weight 485 lbs.
220 kg
Warranty Term 2 Years
Environmental Operating Conditions
Temperature 41-95 °F
5-35 °C
Humidity ≤90%
Altitude 0 - 2000 m above sea level

GET A QUOTE