RapidVap N2/48
Nitrogen Evaporator
DESCRIPTION
The RapidVap N₂/48 Evaporation System combines nitrogen blowdown, vortex motion, and controlled heat to accelerate evaporation of up to 48 small samples or eight 450 mL samples simultaneously. A stream of nitrogen or dry gas reduces the partial pressure over the liquid, speeding solvent removal, while microprocessor-controlled vortex motion increases surface area and continuously mixes samples for maximum recovery. Nitrogen delivery can be applied to 2, 4, 6, or all 8 clusters of six ports, conserving gas when processing fewer samples. Using a dry block heating method, the RapidVap N₂/48 offers a reliable, low-maintenance alternative to water bath systems and is ideal for applications such as drug development, bioresearch, combinatorial chemistry, environmental testing, forensics, and toxicology.
In partnership with Labconco.
Dry Block
Dry heating system prevents potential contamination source
Increased Surface Area
Vortex motion increases surface area for faster evaporation
PTFE-Coated Chamber
Aluminum with PTFE coating for broad range of chemical compatibility
End-Point Detection
Signal completion of run allows samples to be left unattended while drying to desired end point
STANDARD FEATURES
- Dry block heating system prevents adding potential contamination source
- Vortex action, heat, and vacuum combine to accelerate evaporation
- PTFE-coated chamber for broad range of chemical compatibility
- Microprocessor-controlled vortex motion increases surface area for faster evaporation
- Signal completion of run allows samples to be left unattended while evaporation to desired end point
- Microprocessor-controlled nitrogen blow down manifold to facilitate liquid to gas phase change
REQUIREMENTS (not included):
- Sample block
- Glassware
- Nitrogen source with flow rate of 3.5 CFM/100 LPM minimum
- Gas pressure regulator
OPTIONS:
- RS-232 Link for two-way communication (Cat# LC-7910014)
SPECS
| Instrument | RapidVap N2/48 |
| Instrument Catalog Number | LC-7910012 |
| Bath Type | Dry aluminum blocks |
| Number of Sample Positions | Up to 48 |
| Dimensions (w x d x h) | 21.7 x 19.0 x 13.5 in |
| Weight | Net: 92 lbs. (42 kg) Gross: 100 lbs. (45 kg) |
| Sample Layout | Circular |
| Lid Material | Glass |
| Pressure Regulator | 0-20 psi |
| Temperature Range | 0-100 °C |
| Warranty | 1 year |
| Electrical Requirements | 115V, 60 Hz |
| Vortex Motion | Up to 500 RPM |
| Nitrogen Requirements | |
| Flow Rate |
3.5 CFM / 100 LPM minimum |
| Pressure | 5-10 psi |
ACCESSORIES
- PTFE-coated aluminum blocks
- Borosilicate glass tubes
- 600 mL tubes with stems
- 170 mL tubes with stems
- Flat bottom tubes
- Eight-place stainless steel racks
- Glassware caps
GET QUOTE